International
International en
Europe
Austria de
Belarus en
Belgium en fr
Czech Republic en
Finland en
France fr en
Germany de
Ireland en
Lithuania en
Netherlands en
Norway en
Poland pl en
Romania en
Slovakia en
Slovenia en
Spain en
Sweden en
Switzerland de fr
Ukraine en
Home Technology
Become a conductor

Our BRUNNER home technology is practical, easy to use and full of benefits for the user. See what the abbreviations EAS, EOS and USA means and how you will enjoy using these "little helpers".

Service
Secure guarantee extension now

Register your BRUNNER product within the first three months and you will receive a further warranty extension in addition to the usual BRUNNER warranties.

About
Service
Blog
Menu
Close

What wood types are there?

Wood is not just wood - this is particularly evident in its use as a fuel. Birch, oak, beech, ash - they and other woods differ from each other in many aspects and offer advantages and disadvantages when heating fireplaces and stoves. Accordingly, not only the "heat quantity" of the respective type of wood is a decisive factor, but also the burning properties and the requirements one places on the fireplace and fuel.

Differences in wood types

Basically, wood can be divided into hardwood and softwood. These two categories of wood differ in particular in their density. The density of softwoods is lower, which is why they belong to the category of softwoods. Hardwoods, on the other hand, have a higher density.

The decision between hardwood or softwood plays an important role when heating stoves and fireplaces. Due to their different densities, they have different calorific values and thus also burning times. Likewise, the woods differ in their workability and ignitability.

Hardwoods

The most popular hardwoods are birch, oak, beech and ash. They all have in common that they provide a fairly good calorific value and thus a long-lasting burning time. However, they are more difficult to kindle, which is why it is recommended to use softer wood for this purpose.

All the hardwoods mentioned are suitable for open fireplaces, as they contain little resin and therefore do not produce flying sparks. Only oak is less suitable for this purpose. For such cases, Brunner offers spark protection grids for open fireplaces as standard.

Softwoods

Softwoods that are often used as firewood include spruce and pine. Both are softwoods and have a lower calorific value due to their low density. This makes them burn faster, but they are also easier to light.

Spruce and pine wood have a high resin content, which creates a strong spark. These types of wood are therefore more suitable for closed fireplaces. One advantage of resin: it triggers a pleasant crackling and is thus a plus in atmosphere.

Selecting the right type of wood

There are of course more woods that are also well suited for heating. However, the types of wood mentioned are the most common types. When choosing one or more types of firewood, everyone should consider for themselves which functions the fireplace is to fulfil and how the fire is desired.

In the end, it always depends on regional availability which type of wood is the cheapest and easiest to obtain. The lumpiness and the moisture content of the firewood are also important. Dry wood (moisture below 20%, ideally around 15%) should always be used, as it has a higher calorific value and produces fewer emissions.

The wetter the wood, the more it has to be added and the more emissions are produced. Burning with moist wood is also a burden on the wallet, because to achieve the same calorific value with moist wood as with dry wood, considerably more wood is needed.

Specialist tip

Depending on the device, the right type of wood must be selected. For open fireplaces, for example, it is important to have little flying sparks. The wood moisture content is also particularly important. Wood that is too moist has a lower calorific value and negative effects on your stove system.

 

 

 

Klaus Leihkamm, Head of craftsmen consultation & customer service

Blog

These articles might also interest you

Further articles on the topic of heating with renewable energies can be found here in our blog posts.

Fireplaces
19. décembre 2022
Fireplace cladding
Eine Kaminverkleidung gibt dem Kamin erst sein besonderes Aussehen. Sie ist wie der individuelle Rah ...
Tiled stoves
Stove systems
5. décembre 2022
A water-bearing wood stove can do more
A water-bearing wood stove has two great advantages: Firstly, a lot of CO2 can be saved by heating w ...
About wood
22. septembre 2022
Wood moisture measurement
Wer mit Holz heizt weiß: Für ein richtiges Feuer müssen die Scheite gründlich trocken sein. Aber ...
Fireplaces
12. janvier 2022
Space-saving wood stove
Platz ist in der kleinsten Hütte, heißt es und das gilt auch für einen Kaminofen. Es gibt etliche ...
Fireplaces
Tiled stoves
Masonry heaters
Stove systems
27. février 2021
Avoid heating errors
Fireplaces and Tiled stoves spread pleasant warmth and a cosy atmosphere - provided they are operate ...
Fireplaces
Tiled stoves
Masonry heaters
Stove systems
30. juin 2020
Room divider fireplace and storage heater
Crackling fire, dancing flames that spread cosy warmth... everything bathed in a soft light. A wood ...
Fireplaces
About wood
Tiled stoves
Stove systems
19. septembre 2019
Ecological heating with wood, air and sun
Switching from heating oil and natural gas to solar energy, thermal energy and wood as a fuel has ma ...
Fireplaces
Tiled stoves
Masonry heaters
Heating technology
26. juillet 2019
Heating more economically with solid fuels
No one wants to be cold at home these days. People prefer to be warm and cosy within their own four ...
Fireplaces
Tiled stoves
Masonry heaters
Stove systems
17. juillet 2019
Kit fireplace
Kit system tiled stoves and kit system fireplaces are something like the prefabricated house among f ...
About Brunner
29. août 2018
Who is BRUNNER?
The name BRUNNER stands for a company with a passion for stove construction, fireplace construction ...
Order a brochure
You are interested in our products? We send you further documentation.
Order now